Gmaxx 2 metal detector from Regton Ltd. UKs largest metal detector shop - XP GMAXX 2 Metal Detector- Machine Only - XP Metal Detectors - Metal Detectors

Shop by Category

NOW with new Deus 'Style' handle & stem design.

Machine Only

The exciting NEW range of metal detectors from XP has arrived. The all new XP Gmaxx II comes with the entirely new and re-worked circuit board. This has been designed for better performance and gives higher sensitivity. The Gmaxx II will find deeper targets near iron thanks to the super fast recovery time. As with the other new detectors in the XP range, the Gmaxx II will accept the NEW cordless headphones due to the transmitter being built into the circuit board.

Instruction Manual

XP ’s opinion
This evolution of the G-Maxx XP detector profits from a completely new electronic circuit, having new functions such as:

The wireless headphone: the transmitter is now integrated on the circuit boards of these four new detectors. It has been designed with two switchable channels. A FREQ SHIFT switch on the front of the detectors enables the two output channels to be toggled quickly and easily: CH 1 or CH 2.
Changing frequency: a new switch (FREQ SHIFT) enables the detection frequency (Freq. 1 or Freq. 2) to be set to reduce any interference from other XP devices being used nearby.
New analogical filters improving the detection of targets in iron infested areas. The masking circle generated by the iron is greatly reduced. Targets of interest in iron infested areas can therefore be detected more easily, thus enabling sweeping operations to be carried out more quickly.
We have also improved the gradation of the sensitivity settings, which are now far more precise. We have "zoomed in" on the range of sensitivity settings, enabling greater fine-tuning in your adjustments giving you the easiest possible sensitivity adjustments.
The G-Maxx II is still a "multi-tone" detector, but user can now adjust the iron level setting by using the IRON THRESHOLD potentiometer. This potentiometer can be viewed as a detection setting with a range only covering iron. It has fine-tuning settings ranging from 0 to 20. At 0, all iron sounds at medium pitch. The higher the setting, the lower the pitch for detected iron. This, for example, enables small nails just to be picked up at a low pitch, whereas larger ones will be detected at medium pitch. As you will doubtless already know, too high a level of discrimination can hinder the performance of a detector. This setting was previously preset at alevel suited to the majority of users. But most of the time, beginners do not want iron to register on their machines, whereas more advanced users prefer to have this option to make it easier to detect targets on difficult terrain.

Extras
Features
Specifications
Images
Field Test

Optional Extras

	Carry Bag- A carrying bag will help with much more than just carrying your detector. Stop it from getting scratched, or dirty and help to keep the value of the detector. There’s nothing worse than trading in an old machine for less than you would like because of a silly scratch or mark.
	Camouflage Carry Bag- This stylish bag will accept any three-piece stem machine in component form. The bag can be carried on the back for ease of carriage, there are also two large pockets on the front of the bag for accessories as well as two small pockets on the sides for smaller objects.
	XP Cordless Headphones- The wireless headphone system has been developed specially for XP machines and utilises digital microprocessor transmission for optimum audio quality without background noise.
	Mounting Bracket- This bracket is used to mount the control box on the front of the detector instead of the factory fitting at the rear of the armcup. This will give all XP machines the option of changing the balance of the machine.