Accessories | Barrelling & Cleaning | Batteries & Chargers | Bags | Finds Pouches & Aprons | Headphones | Magnets | Pinpoint Probes | Trowels, Scoops | Coin Storage
Metal Detector Shop Home Page
Metal Detectors Metal Detector Books Metal Detecting Accessories Used Metal Detectors Metal Detecting Order Help Order a Brochure
Security Metal Detectors
Interest Free Credit Environment Policy Regton Terms & Conditions Regton Metal Detectors
 

XP Gmaxx 2

 
XP Gmaxx 2 Metal Detector

 

With Coil cover, hipmount bag/control box cover, backphones, rechargeable batteries, onboard charger & carrying bag

The exciting NEW range of metal detectors from XP has arrived. The all new XP Gmaxx II comes with the entirely new and re-worked circuit board. This has been designed for better performance and gives higher sensitivity. The Gmaxx II will find deeper targets near iron thanks to the super fast recovery time. As with the other new detectors in the XP range, the Gmaxx II will accept the NEW cordless headphones due to the transmitter being built into the circuit board.

Coil cover and hipmount bag provided
Roll the mouse over the image to see close up
XP Gmaxx 2
£589.00
Features
Improved sensitivity settings
New 9” Carbon fibre coil & cover
New versatile hipmount bag
3 Part shaft with twin collar locking system
Microprocessor analysis of signals
Multi tone discrimination in ALL METAL mode
Volume control for low tone (iron volume)
All metal: Motion mode
Silencer switch: 3 positions to limit iron false signals
Ground exlusion: adjustable
Light and perfectly balanced
Tough polypropylene arm cup
Fibreglass lower stem
Battery life Alkaline: 50 hours
All of this is FREE with the XP Gmaxx 2 from Regton
Specifications
Length 44" - 53" (adjustable)
Weight 1.535 kg
Frequency 4.6 kHz
Operation 8 x AA batteries
Warranty 2 years

XP ’s opinion  

This evolution of the G-Maxx XP detector profits from a completely new electronic circuit, having new functions such as :

• The wireless headphone : the transmitter is now integrated on the circuit boards of these four new detectors. It has been designed with two switchable channels. A FREQ SHIFT switch on the front of the detectors enables the two output channels to be toggled quickly and easily: CH 1 or CH 2.
• Changing frequency : a new switch (FREQ SHIFT) enables the detection frequency (Freq. 1 or Freq. 2) to be set to reduce any interference from other XP devices being used nearby.
• New analogical filters improving the detection of targets in iron infested areas. The masking circle generated by the iron is greatly reduced. Targets of interest in iron infested areas can therefore be detected more easily, thus enabling sweeping operations to be carried out more quickly.
• We have also improved the gradation of the sensitivity settings, which are now far more precise. We have "zoomed in" on the range of sensitivity settings, enabling greater fine-tuning in your adjustments giving you the easiest possible sensitivity adjustments.

• The G-Maxx II is still a "multi-tone" detector, but user can now adjust the iron level setting by using the IRON THRESHOLD potentiometer. This potentiometer can be viewed as a detection setting with a range only covering iron. It has fine-tuning settings ranging from 0 to 20.
At 0, all iron sounds at medium pitch. The higher the setting, the lower the pitch for detected iron.
This, for example, enables small nails just to be picked up at a low pitch, whereas larger ones will be detected at medium pitch. As you will doubtless already know, too high a level of discrimination can hinder the performance of a detector.
This setting was previously preset at alevel suited to the majority of users. But most of the time, beginners do not want iron to register on their machines, whereas more advanced users prefer to have this option to make it easier to detect targets on difficult terrain.